Electrosynthesis of hierarchical Cu2O–Cu(OH)2 nanodendrites supported on carbon nanofibers/poly(para-phenylenediamine) nanocomposite as high-efficiency catalysts for methanol electrooxidation

The development of highly efficient catalysts using inexpensive and earth-abundant metals is a crucial factor in a large-scale commercialization of direct methanol fuel cells (DMFCs). In this study, we explored a new catalyst based on copper nanodendrites (CuNDs) supported on carbon nanofibers/poly (para-phenylenediamine) (CNF/PpPD) nanocomposite for methanol oxidation reaction (MOR). The catalyst support was prepared on a carbon paste electrode by electropolymerization of para-phenylenediamine monomer on a drop-cast carbon nanofibers network. Afterwards, CuNDs were electrodeposited on the nanocomposite through a potentiostatic method. The morphology and the structure of the prepared nanomaterials were characterized by transmission electron microscope, scanning electron microscope, energy dispersive X-ray, X-ray diffraction, and X-ray photoelectron spectroscope. The results suggested that a three-dimensional nanodendritic structure consisting of Cu₂O and Cu(OH)₂ formed on the hybrid CNF/PpPD nanocomposite. The catalytic performance of CuNDs supported on CNF, PpPD and CNF/PpPD was evaluated for MOR under alkaline conditions. The CNF/PpPD/CuNDs exhibits a highest activity (50 mA cm^?2) and stability toward MOR over 6 h, with respect to CNF/CuNDs (40 mA cm^?2) and PpPD/CuNDs (36 mA cm^?2). This inexpensive catalyst with high catalytic activity and stability is a promising anode catalyst for alkaline DMFC applications.     

ERES: an extended regular expression signature for polymorphic worm detection

Journal of Computer Virology and Hacking Techniques - The quick spreading of modern sophisticated polymorphic worms poses a serious threat to the internet security. So far, several signature...     

Performance based earthquake evaluation of reinforced concrete buildings using design of experiments

Seismic resiliency of new buildings has improved over the years due to enhancements in seismic codes and design practices. However, existing buildings designed and built under earlier codes are vulnerable and require a performance-based screening and retrofit prioritization. The performance modifiers considered are soft story, weak story, and the quality of construction, which are collated through a walk down survey. The building evaluation is performed through a pushover analysis, and performance objective are obtained through initial stiffness of the pushover curve. Using a design of experiments technique, a reliable system input-output relation has been identified and used to evaluate the performance criteria at untried design points (i.e., buildings with different modifier values). The proposed method of performance based evaluation is illustrated through consideration of the different structural deficiencies on a typical six-storey reinforced concrete building in Vancouver. Through the designed experiments, the main and interaction effects of the performance modifiers have also been studied.     

Evaluation of the environmental impacts of rare earth elements production

This study aims to estimate the emissions and evaluate the environmental impacts from the production of rare earth elements (REEs). The life cycle assessment method was used to evaluate the environmental load from the production of each metal. To understand the environmental impacts of REEs production, they were compared with the impacts from the production of base metals and precious metals. The findings of this study should present a scientific baseline for the environmental profile for producing these REEs, which might help lessen their impacts and improve production processes and technologies.     

Structural changes and stress relaxation behavior of κ‐carrageenan cold‐processed gels: Effects of ultrasonication time and power

Ultrasound has been used for cold gelation of κ‐carrageenan hydrocolloid. In this work, the effect of ultrasound conditions such as power (50–150 W) and time (20–240 s) of sonication has been investigated. The application of ultrasound to hydrocolloid dispersion caused an increase in water solubility. The texture profile analysis test was used in order to evaluate the mechanical properties of gels. Textural parameters of κ‐carrageenan gels, enhanced with increasing sonication time and power up to a certain level (usually 2.5 min) and longer sonication times had negative effects. In addition, intrinsic viscosities of sonicated specimens were measured to investigate the molecular characteristics of all samples. An increase in the process time and power reduced the intrinsic viscosity. The microstructural observation by scanning electron microscope determined that applying power ultrasound on κ‐carrageenan dispersions influenced the formation of gel networks significantly.     

Photo-electrochemistry of metallic titanium/mixed phase titanium oxide

In this study, the effect of potassium hydroxide concentration in anodization bath, anodization time, and calcination temperature on the photo-electrochemical behavior of metallic titanium/mixed phase titanium oxide is investigated. Further, the phase structure of a titanium oxide photocatalyst prepared on a titanium electrode through a high-voltage anodization method is examined. The study exploits photo-electrochemical, Fourier transform infrared spectroscopy attenuated total reflectance (FTIR–ATR), X-ray diffraction, and Raman spectroscopic methods to obtain better insights into the mechanism of mixed-phase titanium oxide formation. In this regard, the photo-electrochemical properties of the photocatalysts prepared in single excitation energy, violet light (410 nm), were investigated. The anodization time and the potassium hydroxide concentration in the anodization bath have significant effects on the photo-electrochemical properties of the photocatalysts. The experiments show that the effect of potassium hydroxide concentration is a function of the anodization potential applied, demonstrating different patterns as the anodization potential changes. Furthermore, FTIR-ATR, X-ray diffraction, and Raman spectroscopic studies reveal that the extended anodization times decrease the population of OH-containing groups, leading to lower photo-electrochemical performance. On the other hand, the formation of anatase phases becomes more favorable only in the extended anodization times before application of the calcination process. Additionally, the calcination temperature has a significant impact on the anatase to rutile ratio. Finally, increasing potassium hydroxide concentration leads to the formation of an amorphous titanium oxide layer. It can be concluded that the obtained information might have a significant impact on the preparation of titanium oxide and other metal oxide photocatalysts through the high voltage anodization process.     

Taguchi Optimization of Solvent-Antisolvent Crystallization to Prepare Ammonium Perchlorate Particles

The sphericity and size of ammonium perchlorate (AP) particles significantly influence the properties of composite propellants. As the AP particles become more spherical, the accumulation coefficient increases, the viscosity during casting decreases, and the particle loading and burning rate increase. Hence, the production of micronized AP particles with an average size between 1 and 20 μm is important to increase the loading percentage of AP in the composite propellant. Here, the Taguchi experimental design was used to optimize the solvent-antisolvent crystallization (SAC) process for the preparation of micronized AP particles with higher sphericity. SAC parameters such as the type of antisolvent, the solvent-to-antisolvent ratio, the antisolvent temperature, the stirring speed, and the retention time were investigated at four levels. The type of antisolvent and the solvent-to-antisolvent ratio were found to mainly contribute to improving the sphericity and size of the AP particles, respectively.